Amongst our range of products, we have a selection of products to identify water supply in pipework (both above ground and underground), in pressure vessels, in treatment equipment, and in storage tanks and drums. This includes the supply to domestic, commercial and industrial locations.

The location of underground pipe systems can be identified by either our rot and chemical resistant, polythene underground warning tapes, or by using scratch detectable tape with stainless steel tracer wires. These can assist in locating pipework or surrounding ductwork to prevent damage during excavations by utility or third party contractors. The underground warning tapes include options for reclaimed water, rain water as well as water main, sewer and drain. They are manufactured from 50 micron (0.05mm thickness) virgin grade low-density polyethylene, and contain no PVC. The tapes comply with a number of standards, including: BS2782 for the testing of plastic materials; BS381C for colours; and BS3012 specification for low and intermediate density polythene. The traceable tapes are constructed from 150 micron thick, and the printed details are coated with a transparent layer to provide scratch and chemical resistance. Again, a range of water pipe, drain and sewer options are available.

Pipeline identification tapes can identify the content of water carrying pipes, and are manufactured to BS1710 and BS4800 for construction and colour schemes. Most of the tapes relating to water content tend to be black on green (colour reference 12D45). Our comprehensive range includes drinking water, mains water, chilled water, bore hole water, condensate, hot water, process water, rain water, boiler feed and cold feed. Click this link to see the full range. Also, we have waste water tapes for drain or effluent, and direction of flow tapes.

In addition, there are several tagging options for pipe fittings and valves. There are blank tags or custom printed tags in indoor and outdoor plastics, and metals (aluminium, brass and stainless steel).

At the outlet point, we have a selection of safety labels and signs for drinking water, not drinking water and hot water to ISO EN 1710 and the Safety Signs and Signals Regulations 1996.

If you do not see what you are looking for in the above, please contact us for quotations on custom printed products.

For gamers there may be a mixture of excitement and trepidation when approaching an unmarked door at the end of an under-lit corridor. With all other routes of escape ruled out, the only option is to proceed towards the door. Scenarios flash quickly through the gamer’s mind. Will the door itself be booby-trapped? Are there alien lifeforms or mutants on the other side? Beyond the door could you be plunged into a vat of molten goo? The gamer’s hand is extended and clasps the door handle.

One of the key elements of computer games is to heighten tension, maintain mystique and provide scant information. Back on planet Earth, to offer good practice in the interests of personal welfare and safety, the very opposite should apply. Doorways should be marked clearly to advise of any risks or hazards, which may exist at or behind the doors.

This can comprise a variety of hazards including steps, stairs, uneven floors, sloping walkways, slippery or wet floor surfaces, low ceilings, other overhead obstacles, confined spaces, or other obstructions.

To make matters easier, Label Source supply ranges of health and safety signs to clearly identify and create awareness of such hazards, to prevent accidents or injury from slips, trips, falls or bashes. Other safety ranges for use on doors include access and escape signs.

As the pressure continues to redevelop brownfield sites, there is the need to dismantle defunct buildings, and provide site clearance. A paramount consideration during any demolition or structural alteration of buildings is that it is conducted safely and in a controlled manner for members of staff, sub-contractors and the general public.

Hazards can be numerous and varied, and these can include;

Falling from heights. This can include falling off the edge of building structures, through openings or off partly removed floors. Risk assessments need to be made for safe access, control of work on fragile surfaces and safe use of ladders and scaffolding structures.

Falling objects. Injuries sustained from being hit by parts of the building structure or from tools or other equipment. Exclusion areas and hard hat use, together with covered walkways and reinforced cabs on machines, and use of high reach equipment should form part of any safety plan.

Collapsed structures. Injuries from crush, lacerations and entrapment. Weight loadings, age of premises, former use of premises and surrounding structures should form part of any safety assessment.

Risks from connected services. Gas, electricity and telecommunications supply needs to be isolated or disconnected to prevent accidents. If this is not possible then any pipes or cables should be clearly identified by labelling.

Noise and vibration. Dangers exist to hearing from noise generated during demolition, and power tools need to be assessed to prevent hand vibration injuries. Suitable ear protection should be made available, and all hand held power tools (electric, pneumatic or hydraulic) need to be assessed for exposure levels established.

Hazardous materials. During removal workers can come into contact with asbestos, flammable liquids, paints and acids (covered by COSHH regulations), dust hazards, and microbiological hazards (particularly for hospitals etc.). Identification of all site hazards, and supply of protective equipment to handle such dangerous substances.

Risks from outbreak of fire.  Where sparks, heat or flames are generated during demolition there is the potential for fire.  A fire plan should be regularly updated identifying escape routes, location of fire fighting equipment and fire action training.

Risks from traffic accidents. Plant mobile equipment and vehicles used to remove debris from the site. A traffic plan should be established with designated pedestrian and vehicular routes, clearly marked crossing points, with controlled access for vehicles and establishing turning areas.

Risks from rodents and insects. Potential bites, stings and inhalation of contaminated dust from urine and faeces. It is necessary to provide protective clothing (ie gloves, dust masks), and have a policy on disposal of carcases.

Label Source can assist you with safety induction of staff and subcontractors with our range of health and safety signs to the latest legislation to identify workplace hazards, mark prescribed pedestrian and vehicle routes, fire equipment and access routes, and to identify the mandatory use of protective equipment and workwear. Also, we supply a range of construction related barrier tapes and underground utility pipe and cable marking tapes.

Earlier this week, we told you all about UK Health & Safety Week, which is currently on its last day for 2015. That blog post included the following list:

• Mesothelioma and other asbestos-related illnesses
• Respiratory diseases
• Musculoskeletal disorders
• Skin complaints
• Hand arm vibration
• Stress and mental health problems

There are the specific workplace hazards that the organisers of Health & Safety Week wanted to address with this year's event. Today, we're going to tell you how Label Source can help you and your employees to steer clear of these problems.

Asbestos-Related Illnesses

Our asbestos range is home to many labels and warning signs that can be used to identify asbestos hazards and warn everyone to stay clear. Some of these products also give instructions on how to safely deal with asbestos.

Respiratory Diseases

If your employees are being exposed to smoke, fumes, spores, vapours, sprays, or airborne particles, this sign will remind them of the PPE they should be using to minimise the risk of respiratory diseases.

Musculoskeletal Disorders

Improper manual handling techniques are perhaps the most common cause of musculoskeletal disorders. Visit our Manual Handling Safety department for a range of products that will help you and your employees to follow best practices when lifting heavy objects.

Skin Complaints

Do your employees work with hazardous chemicals or other potential irritants? Make sure that all dangerous substances and workspaces are clearly identified with the appropriate signs/labelHand Arm Vibration

Some hand-held tools vibrate violently when in use, and this can lead to HAVS (Hand Arm Vibration Syndrome) and other painful disorders. To prevent this, carry out a full vibration risk assessment and label your equipment appropriately to inform workers of the recommended safe use periods

Stress

Obviously, stress can't be attributed to one sole factor, and to truly address stress in your workplace may require a substantial re-working of your current practices. Still, our stress management posters may be a good place to start - they identify some common causes and recommend ways to reduce stress in a working environment.

Give Label Source a call on 0800 3761 693 if you need any help to improve the health and safety standards of your workplace.

Many companies operate with the risk to health from exposure at work to biological agents. These bacteria, viruses, parasites or fungi can cause biological infection, ranging from mild discomfort to acute or even chronic health issues. Therefore, it is imperative that such biohazard risks are identified, fully assessed and controlled.

Much of the legislation covering biological safety stems from the Control of Substances Hazardous to Health (COSHH) 2002 and The Management of Health and Safety at Work Regulations 1999, and lays the foundation for effective measures to minimise or eliminate biological risks to human health.

Many health and safety measures to prevent biological infections can include controlling the following;

• Personal hygiene. To encourage regular washing of hands, and where practical supplementing with the use of hand sanitisers.
   
• First aid. All open wounds such as cuts, scratches or grazes should be washed and treated, before being covered with protective, waterproof dressings. Eye wash or emergency shower facilities.
   
• Rest areas. All meal breaks should be taken remotely away from the work area.
   
• Cross contamination. Avoid the transfer of infection from hands by contact to eye, mouth or nose.
   
• Protective clothing. Appropriate personal protective equipment (PPE) should be worn to eyes (visors face shields or goggles), breathing (masks or respirators), ears (ear protectors), hands (gloves or gauntlets), body (aprons, gowns, lab coats or overalls), and feet (overboots).
   
• Waste disposal. Contaminated waste, substances or clothing should be disposed of safely.
   
• Housekeeping. Work equipment and work surfaces should be cleaned and decontaminated, which may include sterilizing or autoclaving in some sectors.
   
• Building maintenance. Air conditioning should prevent build up or circulation of dusts or liquids, water supply should be checked for micro-organism growth (legionella), and adequate ventilation
   
• Pest control. To prevent bites and infection from waste from pests, insects or animals.
   
• Protection from injury by sharps. To prevent the piercing of skin from needles or broken glass.

It is the employers’ responsibility to identify any of the risks and accompanying preventative actions necessary as outlined above.  At Label Source we supply a comprehensive range of health and safety signs to promote good practice and endorse sound operating procedures. These include biological hazard warning signs, labels and tapes; mandatory safety signs including personal protection ranges; prohibition safety signs; first aid signs; and waste management signs.

Our customers include:

• Clinical or biomedical scientific research laboratories.
   
• Healthcare, including hospitals, health centres, dental surgeries, social care, chiropodist or acupuncture practices, and associated services, such as porters, cleaners and laundry workers.
   
• Animal welfare, such as veterinary practices, zoos, farms, kennels, catteries and stables.
   
• Social services including, social workers, care workers and custodial services (police or prison services).
   
• Horticultural services such as groundsmen, gardeners and park keepers.
   
• Waste services including refuse collectors, sewerage workers, ditch cleaners and sludge removers.
   
• Other services including undertakers, grave diggers, poultry processors, abattoirs, butchers, tattooists, hairdressers and beauticians.

For more information on the product ranges available on biological hazards please visit our website www.labelsource.co.uk or contact us by e-mail on sales@labelsource.co.uk for further information.