It states in the Health and Safety (Safety Sign and Signals) Regulations 1996 the following "The regulations to ensure that safety signs are provided (or are in place) and maintained in circumstances where there is significant risk to health and safety that has not been removed or controlled by other methods" so in order to comply with the regulations you must ensure that there is safety and warning signs in place or you could face some serious penalties. But what if there is space restrictions stopping your from putting these signs in place? These Small Safety Signs are perfect for that exact reason!
These Small Safety Signs are made from semi-rigid plastic and have an adhesive backing allowing them to stick to any surface with ease! These labels cover the full range of safety sign classifications from Fire Equipment (e.g. Fire Extinguisher, Fire Alarms and Fire Assembly Points) to Mandatory Signs, such as "Wear Eye Protection" signs and "Wear Mask" signs. Each sign is colour coded and complies with ISO1070 and the Safety Sign and Signals Regulations 1996. These signs are perfect if space restrictions are stopping you from placing safety and warning signs in the area.
Click here to view our full range of Small Safety Signs.
A few days ago, it emerged that Tata Steel had been fined over £2m, after two serious incidents occurred at its Northamptonshire site. Both of these involved workers sustaining severe hand injuries, as a result of avoidable contact with dangerous machinery.
The first of these incidents involved a 26 year old worker, who lost the middle and ring fingers on his left hand, after trying to clear a blockage on a manufacturing line with unsuitable guarding. The second incident occurred in 2015, when a 52 year old lost part of his little finger after it became caught in a lathe, again, due to unsuitable guarding on the machinery.
Although a spokesman for Tata was quoted as stating that health and safety is the company's most important priority, serious questions must be raised after two near identical incidents took place within months of one another, on the same premises no less! It is clear from the evidence found upon inspection by the HSE, that there was an obvious neglect of duty in terms of properly identifying the serious risks posed to Tata workers, as well as a failure to resolve this issue after the first incident occurred.
It shouldn't take a serious injury or fatality to make a company take their health and safety procedures seriously, and one would hope that it wouldn't take multiple incidents for a company to implement serious changes. Perhaps the only consolation going forward, is that other companies will be struck by the severity of the issue, and therefore implement better prevention strategies in their own workplaces.
For anyone concerned with avoiding the mistakes made by Tata, remember to follow a simple but impactful health and safety strategy:
- Educate - Ensure that staff are thoroughly trained before operating dangerous machinery, or performing hazardous tasks without supervision.
- Inform - Make staff aware of the risks involved in their operations, displaying safety signs and warnings to keep the message fresh in people's minds.
- Protect - Ensure that the correct safety features are in place to minimise potential risks, and provide the required personal protective equipment.
- Asses - Regularly evaluate the level of safety in your workplace, and identify any potential risks that require preventative action.
For more health and safety news and advice, follow us on Twitter, Facebook & Google+
Over the years, we at Label Source have worked with many clients in both the NHS and the private hospital sector. We provide these customers with a range of fit-for-purpose medical equipment labels for hospitals, included custom-printed labels as well as a variety of different items from our standard product ranges.
We have worked with many different departments who have used our medical equipment labels for hospitals, including:
- EBME
- Electronics
- Engineering
- Bio-Medical
- Building Services, Facilities & Estates
- IT & Computer Services
What are our medical equipment labels for hospitals suitable for?
The labels we supply can be used in the testing, servicing, maintenance and calibration of medical equipment. They are suitable for mechanical, electrical (including PAT testing), and radiation equipment. Additionally, many of the labels we provide are used to identify ownership and improve traceability of medical equipment (as well as plant and ancillary equipment) via serial numbers or barcodes. Our labels can also be used to simply identify the prescribed use of the equipment in question.
All of our medical equipment labels for hospitals are designed to meet the unique challenges that take place in a clinical environment. They are resistant to solvents, chemicals and scratches, with a wipe-clean surface for optimum hygiene.
Browse the Label Source website to find the medical equipment labels for hospitals you need, or get in touch via one of the methods below to discuss your labelling requirements with a member of our team.
- Email:info@labelsource.co.uk
- Telephone (UK only): 0800 3761 693
- Telephone (Rest of the World): 0044 1443 842769
Here are some of the other products we supply to the healthcare sector:
The dangers of asbestos are a subject we've covered time and again here on the Label Source blog, but we're continuing to see story after story about people who don't take those dangers seriously enough, and about the consequences that this attitude can lead to.
The latest such story was publish only today by the Worcester News.
Story and photograph from www.worcesternews.co.uk
Back in October 2013, Christopher Whitehead Language College in Worcester hired two 18-year-old workers to remove an asbestos roof from a small lean-to building on the school grounds. The pair accomplished this by knocking the asbestos down from atop the building before double-bagging the material and disposing of it.
If you've ever heard the line about how 'asbestos is perfectly safe as long as it isn't disturbed'*, you'll spot the problem with this method right away. By knocking the asbestos roof down, the two workers at Christopher Whitehead School no doubt released a great number of asbestos fibres into the air and risked inhaling them. While asbestos exposure causes no instantaneous harm, more than 4 thousand people die every year in the UK from slow-acting asbestos-related conditions such as mesothelioma. And while the work was carried out during the October half-term holiday, this doesn't necessarily mean that the two workmen were the only people at risk here, as this story from the British Lung Foundation illustrates.
So here we are, saying it again: asbestos fibres are deadly and every measure should be taken in order to keep them from being released into the air and potentially breathed in. Knocking apart an asbestos roof is very dangerous; indeed, this was recognised in a complaint about the work at Christopher Whitehead School by public service union Unison. This complaint was upheld by the Health and Safety Executive, who reprimanded the school for poor health and safety practices.
Click here for more information on how to deal with asbestos safely, or visit our Asbestos Signs & Labels department to browse our full range of asbestos safety products.
*From the HSE's web page on asbestos: "As long as asbestos is in good condition and is not disturbed there is negligible risk. However, if it is disturbed or damaged, it can become a danger to health, because asbestos fibres are released into the air and people may breathe them in."
If your business is based in the Republic of Ireland and you need high-quality asset tags produced to your own unique specifications, we at Label Source can help. We frequently supply bespoke asset tags to clients in Ireland, and no matter what you require, we are confident that our experienced design team are capable of providing a suitable solution.
We offer the following options for customers ordering asset tags from the Label Source website:
- Materials: aluminium foil, self-adhesive polyester, self-adhesive vinyl, tamper-evident polyester, tamper-proof destructible vinyl
- Numbering Systems: code 128 bar codes, code 39 bar codes, interleaved 2 of 5 bar codes, numbering only, no numbers/bar codes
- Custom text, specified by yourself
- A wide variety of sizes and colours
Our asset tags are supplied in rolls of 500 labels per pack. Delivery charges for the Republic of Ireland are as follows:
- Order Value £20-£49.99 // Delivery Cost £17.85
- Order Value £50-£99.99 // Delivery Cost £20.95
- Order Value £100-£249.99 // Delivery Cost £24.40
- Order Value £250-£499.99 // Delivery Cost £31.30
- Order Value £500-£999.99 // Delivery Cost £39
Click here to browse our full range of asset tagging products, or visit our Asset Tag Builder if you'd like to customise your tags yourself.
